A fast setting superior grade tacky acrylic water-based adhesive. Open time 60 minutes. Suitable for vinyl and carpet tiles, sheeting and many floor coverings.
Low cost Bitumen-Latex adhesive with fast setting properties.
Mix the components in the ratio 5.8+1.2 by weight(5:1 by volume), and use within 20 minutes.
Priming is necessary for damp and new subfloors. A two component water-based epoxy with low viscosity for easy penetration.
General purpose contact adhesive. Solvent based, Non Flammable, Toxic solvents. Methylene Chloride base.
A fast setting general purpose tacky acrylic water-based adhesive. Open time 30 minutes. Suitable for vinyl and carpet tiles.
An Acrylic Based high viscosity PSA adhesive with short open time and long tack. Good for LVT and similar tiles. VOC 10gm/ltr.
A general purpose PVA based adhesive for woodblock and parquet flooring. 20-30 minute open time, wait for the colour change.
Mix the components in the ratio 9+1 by weight, and use within 20 minutes. Available in Natural and Green. Ideal for seam sealing of Turf.
A general purpose emulsion based primer for binding soft plaster.
General purpose cleaning solvent containing Toluene and Ketone. High VOC. Highly flammable. Toxic vapours.
A fast setting permanently tacky acrylic water-based adhesive. Open time 120 minutes. Suitable for pressure sensitive applications.
Available in 600ml sausages. Apply to primed surface and embed flooring while wet.
Concentrated Carboxyllated SBR Latex, ideal for waterproofing cement.
General purpose non-flammable cleaning solvent. Non-flammable, Toxic solvents. Methylene Chloride base.
A two component Latex and cement compound, mixed together for waterproofing showers before tiling.
PVC weld adhesive in a 250ml and 500ml tins. Brush included.
Solvent-based cream coloured flammable contact adhesive with high heat resistance and fast setting speed.
Solvent-based clear flammable contact adhesive combining rapid speed with economy of use.